How To Program Caddx Nx 8 Wiring
ARMING IN “EXIT” MODE EXIT is used when the user is away from the premises
and wants the interior protected (the motion detectors ON).
ARMING IN “STAY” MODE STAY is used when the user is inside the premises and
An extensive tutorial on programming the NX4, NX6, and NX8 Interlogix NetworX panels <Back Hi. My name is Jason with alarmsystemstore.com. In today's video, I'm going to be doing the basic programming for the Interlogix NetworX panels. This video will apply to any of the network systems, the NX4, NX6, NX8. Enter program mode and program the desired settings for each module. When you exit program mode, the NX-8V2 automatically enrolls the devices. The enrolling process takes about 12 seconds, during which time the Service LED illuminates. If a speaker is attached to the NX-8V2, it clicks at this time.
wants protection around the perimeter (the motion
Ibanez cavity depth. DISARMING SYSTEM Enter code.
user code, enter * * * * for a 4-digit code.
How To Program Caddx Nx 8 Wiring Instructions
7. Press the “#” key while the ready light is flashing to
BYPASSING ZONES System must be in disarmed state.
2. Enter 1 or 2 digits indicating the zone you wish to
bypass. (Example: Press the “1” key for zone 1,
4. The corresponding zone light will illuminate indicating
the zone has been bypassed. Repeat steps #2 and #3 for
any other zone(s) that need to be bypassed.
5. Press the “#” key to exit the Bypass Mode. The bypass
light will stop flashing upon exiting the Bypass Mode.
All zones will automatically be unbypassed each time the
system is disarmed.
2. The ALARM MEMORY feature will flash those zones
that created alarms and will light steady those zones that
IDENTIFYING TROUBLES
FLASHING ARMED LIGHT The armed light will flash when there has been
an alarm during the previous arm cycle.
POWER LIGHT OFF No AC power.
POWER LIGHT FLASHING Low system battery.
FIRE LIGHT FLASHING Trouble with fire device or wiring.
ZONE LIGHT FLASHING RAPIDLY A zone is in a trouble condition.
SERVICE LIGHT IS ON Press “*2” for further information (indicated by
zone lights).
Zone 1 – System fault.
Zone 2 – Zone tamper.
Zone 5 – Zone trouble.
Zone 6 – Telephone trouble.
Zone 7 – Dialer failure.
Zone 8 – System lost time.
Enter “#” to exit mode.
ENTER CODE TO SILENCE TROUBLE BEEPS.
ENTER “*7” TO ATTEMPT TO RESET TROUBLES.
ENTER CODE TO CLEAR SERVICE LIGHT AFTER A PHONE TROUBLE HAS BEEN CLEARED.
SET CLOCK 1. Press “*97.”
Download Operation & user’s manual of CADDX NX-8 Control Panel, Security System for Free or View it Online on All-Guides.com. This version of CADDX NX-8 Manual compatible with such list of devices, as: NX-8, NX-8e, NX6UB98, NX8EUA01, NX8UI00
Brand: CADDX
Category: Control Panel , Security System
Type: Operation & user’s manual
Model: CADDX NX-8 , CADDX NX-8e , CADDX NX6UB98 , CADDX NX8EUA01 , CADDX NX8UI00
Pages: 18